|
STANDARD
FEATURES
High Metering
Accuracy
Dispensing accuracies of +- 1/2% or better are easily achieved and maintained
without readjustment or recalibration.
Micrometric
Volume Control
Dispensed volume is easily and precisely adjusted on a convenient micrometer
scale. All pumps are adjustable from 10-100% of their range. Volume
adjustments can be made while the pump is operating.
Integral Pneumatic
Controls
Pumps are fully self contained units with built-in state-of-the-art
pneumatic controls. A start signal (either electric or pneumatic) is
all that is required to initiate a full dispense cycle.
Precision Speed
Controls
Dispensing and suction stroke speeds are precisely controlled by individual
pneumatic flow control valves. Micrometer scale adjustments are designed
to provide fine speed control over a wide range of dispensing speeds.
Speed adjustments are entirely independent of volume adjustment.
Long Service
Life
Wear free design and use of high quality materials such as Zirconia
Ceramic and 316 Stainless Steel provide reliable operation for millions
of cycles.
Easy to Clean
and Maintain
Unique tie rod design holds valve head, pump body and base drive unit
accurately aligned. Loosening the tie rods enables the whole pump head
to be removed and easily disassembled for cleaning and sterilizing.
Additional pump heads allow rapid changeover, one pump being cleaned
while the other is in production. The pumps can easily be overhauled
in the field by replacing a few inexpensive components.
Adaptability
for Automation
Hibar 'F' Series pumps are completely self-contained, ready for installation
on virtually any automated liquid dispensing or filling machine. No
additional motors, cams or linkages are necessary. Connection to an
air supply and provision of a start signal is all that is required for
operation.
|
Versatility
A wide variety of fully interchangeable
infeed connections and nozzles are easily installed to suit specific
applications. Quick interchangeability of these components enables rapid
changeover or cleanups. Infeed connections can be set up for hoppers
or direct coupling to storage or process vessels. A full range of accessories
provide even more versatility.
Quality and
Service
Hibar pumps are manufactured
to uncompromising quality standards. Produced using the best materials,
advanced manufacturing techniques and rigid Quality Control, Hibar 'F'
Series Metering pumps provide excellent reliability and performance.
Our product quality is further enhanced by Hibar's dedication to Customer
Service and Technical Support.
STANDARD
MODELS
4 Models are available
to dispense liquids in various fill volumes:
| Model
No. |
Minimum/Maximum |
Fill
per stroke |
| 4F3-170 |
17-170
ml. |
1/2-6 oz.
|
|
5F4-540
|
50-540
ml. |
2-19
oz. |
| 5F4-780 |
75-780
ml. |
3-27 oz.
|
| 5F6-1046 |
100-1046
ml. |
4-37
oz. |
All Models are available
in either Check Valve or Rotary Valve design.
Check Valve:
0 - 10,000 cps viscosity liquids containing no solid particles or fibres.
Rotary Valve: Medium
to high viscosity liquids which may contain solid particles or fibres.
Standard wetted materials
include 316 Stainless Steel, Zirconia Ceramic, Delrin and Viton. Other
specialized materials are available to suit specific applications.
ACCESSORIES AVAILABLE
- Positive Shut-off
Nozzles
- Heating Packages
- Suckback Units
- Mounting Rigs
- Hoppers
- Mobile Carts-Pump
Stands
- Bottom-up Filling
Units
- Pressure Feed
Systems
- Adjustable Container
Platforms
|
